Prevost PROLAC Coupler- High Flow Profile


















Prevost PROLAC Coupler- High Flow Profile

Prevost PROLAC Coupler- High Flow Profile

Prevost PROLAC Coupler- High Flow Profile
Prevost PROLAC One-Push Instant Disconnect Coupling: To connect: Place the fitting into the coupler, and push together. To disconnect: Press the button once. The connected fitting will release immediately..<br/><br/>To quickly determine thread size, measure the diameter of the smallest thread.<br/><br/>1/4" thread = 17/32” (14mm)<br/>3/8" thread = 21/32” (17mm)<br/>1/2" thread = 27/32” (21mm)<br/><br/>Prevost PROLAC One-Push Instant Disconnect Coupling: To connect: Place the fitting into the coupler, and push together. To disconnect: Press the button once. The connected fitting will release immediately..<br/><br/>To quickly determine thread size, measure the diameter of the smallest thread.<br/><br/>1/4" thread = 17/32” (14mm)<br/>3/8" thread = 21/32” (17mm)<br/>1/2" thread = 27/32” (21mm)<br/><br/>Prevost PROLAC One-Push Instant Disconnect Couplers. To connect: slide a fitting into the Prolac Coupler and push together until the fitting locks into place. To disconnect, press the air release button ONCE. The Prolac Coupler will release an attached fitting immediately.<br/><br/>Prevost Prolac One-Push Instant Disconnect Couplers are available in a trio of thread sizes (1/4", 3/8", and 1/2"). The couplers shown in this photo feature 1/4" NPT thread, which are capable of flowing up to 34 cubic feet per minute of air. This equates to 254 gallons per minute!<br/><br/>Specifications-<br/>1/4" NPT Thread | High Flow Profile<br/><br/>ERC 071201<br/>Prevost Prolac 1-Push Instant Disconnect Coupler | Female Thread | Flow: 34 CFM / 254 GPM<br/><br/>ERC 071251<br/>Prevost Prolac 1-Push Instant Disconnect Coupler | Male Thread | Flow: 34 CFM / 254 GPM<br/><br/>ERP 076201<br/>Air Fitting aka Plug | Female Thread<br/><br/>ERP 076251<br/>Air Fitting aka Plug | Male Thread<br/><br/>ERP 076201 | High Flow Profile | 1/4" Female NPT Thread Fitting/Plug<br/><br/>ERP 076251 | High Flow Profile | 1/4" Male NPT Thread Fitting/Plug<br/><br/>About NPT thread: National Pipe Taper thread progressively flares in diameter from small to large, ensuring an airtight seal as components are screwed together. Three size variations of NPT thread are commonly used to build compressed-air systems (1/4" | 3/8" | 1/2").<br/><br/>EBG 07PRE • Prevost PREVO S1 Compact Blow Gun with Composite Nozzle<br/><br/>Fits 1/4" NPT Thread Couplers | High Flow Profile<br/><br/>Specifications-<br/>Maximum Air Pressure: 174 PSI<br/>Noise Level: 85 dBA  (no distance to microphone given)<br/>Blowing Force (at 87 PSI): 10 Ozf<br/>Air Consumption (at 87 PS): 8.2 CFM<br/>Dynamic Pressure (at 87 PSI | 4" distance): 36 PSI<br/><br/>EBG 07MTL • Prevost PREVO S1 Compact Blow Gun with Metal Nozzle<br/><br/>Fits 1/4" NPT Thread Couplers | High Flow Profile<br/><br/>Specifications-<br/>Maximum Air Pressure: 174 PSI<br/>Noise Level: 89 dBA  (no distance to microphone given)<br/>Blowing Force (at 87 PSI): 14 Ozf<br/>Air Consumption (at 87 PS): 11.8 CFM<br/>Dynamic Pressure (at 87 PSI | 4" distance): 32 PSI<br/><br/>
Click to enlarge image(s)


Prevost PROLAC Coupler - High Flow Profile.
Click the images to view detailed shots & information.

Prevost® PROLAC One-Push Instant Disconnect Couplers feature smooth & grippy bodies. Installing a fitting into the coupler is direct, and precise.

"Click"... and "Pop!" These are the simple sounds that Prolac Couplers make as fittings are pressed into place, and then decoupled with one press of the air release button.

To connect: Press the fitting into the coupler until it locks into place.
To release: Press the disconnect button once.

For optimum performance:
Use only precision-matched Prevost Fittings/Plugs.

  Add an S1 Compact Blowgun. Composite or metal tip.

 We carry a wide variety of Prevost products. View them here.

 Also available in   Truflate  and   Industrial profiles.
Specifications & Terminology:

• A fitting or plug mounts to the inlet side of a hose
  or tool. Fittings plug into couplers, and lock into place.
 

• Three sizes of NPT thread are commonly used to
   build compressed-air systems (1/4" | 3/8" | 1/2").
• A coupler mounts to the outlet side of a compressor,
  hose, or distribution block. Couplers accept fittings that
  plug into them, coupling or mating them together.

NPT thread: National Pipe Taper thread progressively
  flares in diameter from small to large. This ensures an
  airtight seal as components are screwed together.

• Prevost PROLAC 1-Push Instant Disconnect Coupler

• High Flow Profile

Part number & SKU & thread type:
ERC071201 | ERC 071201 | 1/4" NPT female
ERC071251 | ERC 071251 | 1/4" NPT male
Specifications:
Operating Pressure: 0-174 PSI
Max Flow Rate: 34 CFM @ 100 PSI