Mirka 3" Soft-Faced Interface Pad- 1/2" thick



















Mirka 3" Soft-Faced Interface Pad- 1/2" thick

Mirka 3" Soft-Faced Interface Pad- 1/2" thick

Mirka 3" Soft-Faced Interface Pad- 1/2" thick
Mirka 1033 | 3" Velcro Interface Pad • 1/2" tall<br/><br/>The Mirka 1033 3" Velcro Interface Pad utilizes low-profile micro hooks, which strongly secure sanding discs into place (even during heavy friction, high RPM sanding).<br/><br/>When sanding using thin or flimsy sanding discs, short hooks ensure a flat and consistent cut, and lessen the potential for "hook marking" of the sanding surface.<br/><br/> Matched low-profile Velcro loops keep the interface pad tightly attached to the backing plate, which minimizes friction-induced heat caused by rapid & repeated shifting of the hooks and loops.<br/><br/>Mirka 9133 | 1033 | 9947 | 3" Velcro Interface Pads<br/><br/>This trio of Mirka 3" Interface Pads can improve the performance of any Velcro-backed sanding disc.  The Mirka 1033 and 9133 include a cushiony foam interlayer (sandwiched between layers of hook and loop Velcro), which helps sanding discs to readily conform to complex surfaces. They also help to compensate for inadvertent tilting of the machine during sanding.<br/><br/>The Mirka 9133 and 9947 were originally designed for use with Mirka Abranet and Autonet Sanding Discs, but can be used with other types of disc as well.<br/><br/>Mirka 9947 | 3" Abranet Pad Protector • 1/16" tall<br/><br/>The Mirka 9947 3" Abranet Pad Protector is designed to to be used with Abranet and Autonet sanding discs.  The open mesh design employed in Abranet and Autonet products allow the backing plate's Velcro-style hooks to protrude through the mesh. If this occurs, the hooks can degrade quickly, AND cause marring of the surface being sanded!<br/><br/>Avoid this problem by installing a Pad Protector.  This simple device will not only protect the backing plate and surface being sanded, it also increases adhesion of the sanding disc to the backing plate.<br/><br/>Mirka 9133 | 3" Abranet Velcro Interface Pad • 3/16" tall<br/><br/>The Mirka 9133 3" Abranet Interface Pad is designed to to be used with Abranet and Autonet sanding discs.  The open mesh design employed in Abranet and Autonet products allow the backing plate's Velcro-style hooks to protrude through the mesh. If this occurs, the hooks can degrade quickly, AND cause marring of the surface being sanded!<br/><br/>Avoid problems by installing this interface pad (or the Mirka 9947 Pad Protector).  Specialized hooks eliminate the potential for damage to the surface being sanded, and efficiently grab ahold of Abranet and Autonet Net Mesh Discs.<br/><br/>1033 | 1066 | 1066F | 1066SF<br/>  Mirka Velcro Interface Pads<br/><br/>When a sanding disc is mounted directly onto a backing plate, its ability to contour is limited by plate rigidity. Although leveling capability might increase, edge-digging is likely to occur. Full-width utiliztion of the disc becomes difficult when sanding complex surfaces. When an interface pad is installed between the backing plate and disc, contourability increases.<br/><br/>If the machine is tilted off-kilter, the interface pad aids in keeping the full width of the disc in complete contact with the sanding surface. Attempting to sand using a small section of a disc can be difficult; an interface pad can make all the difference.<br/><br/>Mirka 3" Sanding Products<br/>1033 | MR-350 | Q.Silver Sanding Discs<br/><br/>Mirka Q.Silver 3" & 6" Sanding Discs<br/>Mirka Q.Silver Discs can take a lot of abuse, as the resin (adhesive) used to attach its abrasive grains to the disc is very resistant to heat. Mirka Q.Silver Discs can be used wet or dry. Depending upon the grade, Q.Silver Discs utilize various weights of paper (or thickness) and abrasive grains (alumunum oxide or silicon carbide). Q.Silver Sanding Discs are available in the following grades:<br/><br/>3" diameter<br/>2B-608-080 (P080) | 2B-608-120 (P120)<br/>2B-608-150 (P150) | 2B-608-180 (P180)<br/>2B-608-220 (P220) | 2B-608-320 (P320)<br/>2B-608-400 (P400) | 2C-608-600 (P600)<br/>2C-608-800 (P800) | 2C-608-1000 (P1000)<br/>2C-608-1200 (P1200) | 2C-608-1500 (P1500)<br/><br/>6" diameter<br/>2B-622-080 (P080) | 2B-622-120 (P120)<br/>2B-622-150 (P150) | 2B-622-180 (P180)<br/>2B-622-220 (P220) | 2B-622-240 (P240)<br/>2B-622-320 (P320) | 2B-622-400 (P400)<br/>2B-622-500 (P500) | 2C-622-600 (P600)<br/>2C-622-800 (P800) | 2C-622-1000 (P1000)<br/>2C-622-1200 (P1200) | 2C-622-1500 (P1500)<br/><br/>Mirka 3" & 6" Interface Pads<br/>A wide variety of interface pads ensure that just about any sanding disc can deliver maximum performance while working on any sanding surface. Mirka offers interface pads with no foam, skinny foam, fat foam, stiff foam, and soft foam.<br/><br/>Mirka MR-350 3" Bulldog Palm Sander<br/>5mm orbit diameter | 0-12,000 RPM<br/><br/>Mirka 3" Sanding Products<br/>9133 | MR-350 | Microstar Discs<br/><br/>Mirka Microstar 3" & 6" Dry-Sanding Discs are designed for use without water. They are engineered to absolutely resist debris loading. Since no water is used during sanding, it is much easier to gauge sanding results. Microstar Dry-Sanding Discs are available in the following grades:<br/><br/>3" diameter<br/>FM-608-800 (P800) | FM-608-1000 (P1000)<br/>FM-608-1200 (P1200) | FM-608-1500 (P1500)<br/>FM-608-2000 (P2000) | FM-608-2500 (P2500)<br/><br/>6" diameter<br/>FM-622-800 (P800) | FM-622-1000 (P1000)<br/>FM-622-1200 (P1200) | FM-622-1500 (P1500)<br/>FM-622-2000 (P2000) | FM-622-2500 (P2500)<br/><br/>Mirka 3" & 6" Interface Pads<br/>A wide variety of interface pads ensure that just about any sanding disc can deliver maximum performance while working on any sanding surface. Mirka offers interface pads with no foam, skinny foam, fat foam, stiff foam, and soft foam.<br/><br/>Mirka MR-350 3" Bulldog Palm Sander<br/>5mm orbit diameter | 0-12,000 RPM<br/><br/>About Mirka Interface Pads<br/><br/>Interface Pads are placed between backing plates and sanding discs, with the intent to substantially improve overall sanding performance. Interface pads enable sanding discs to conform to their maximum ability.They also assist in distributing machine weight, and user-applied pressure.<br/><br/>An interface pad can decrease uncontrolled wandering of the machine, which occurs when a disc cannot conform to the surface being sanded (due to backing plate rigidity). If the choice is made to use only a portion of the disc by intentionally tilting the machine, the portion in contact with the sanding surface receives adequate support from the interface pad.<br/><br/>HP3-VELCRO<br/>3" Dome-Shaped Velcro Hand Sanding Pad.<br/><br/>Shown with the included 3" Foam Velcro Interface Pad.<br/><br/>HP3-VELCRO<br/><br/>3" Dome-Shaped Velcro Hand Sanding Pad.<br/><br/>Left: Shown with a Mirka® Autonet Mesh Fabric Sanding Disc, and a Mirka 9947 Pad Protector.<br/>Right: Shown with a Mirka® 1033 3" Foam Velcro Interface Pad.<br/><br/>HP3-VELCRO<br/>3" Velcro Dome Hand Sanding Pad.<br/><br/>Shown with Mirka 9133 3" Abranet Velcro Interface Pad.<br/><br/>HP3-VELCRO<br/>3" Velcro Dome Hand Sanding Pad.<br/><br/>Shown with Mirka 9133 3" Abranet Velcro Interface Pad, and a 3" Autonet Mesh Fabric Sanding Disc.<br/><br/>
Click to enlarge image(s)


A quality interface pad, for just about any sanding task.

The time may come when you'll need to sand a sphere-shaped item, a cylinder, or a wickedly-curved fender. To achieve maximum cushioning and shapability of the sanding disc, this is the interface pad you'll need. The Mirka 1033 3" Velcro Interface Pad measures 3" in diameter, and is 1/2" tall. Also available in a 6" version: 1066SF

Note that due to its height, this interface pad may lessen sanding disc movement, particularly if paired with small stroke machines. Please view photos for more information.

Add a Dome-Style Hand Sanding Pad. This uniquely shaped block makes sanding by hand a breeze to accomplish. Its yellow cushiony material is soft, making it easy to grasp, even when wet. The Velcro face is molded into place (not glued), so pad failure is  unlikely. A soft interface pad is included (interface is not a Mirka product).

 Mirka 3" Velcro Backing Plates can be found here.

 Mirka 3" Velcro Interface Pads1033 | 9947 | 9133

 Mirka 3" Velcro Sanding Discs can be found here:
        Abralon | Abranet | Autonet | Silver | Microstar

 More Interface Pad info: Interface Pad Facts.