Buff Daddy Shipping Contact About Cart KBM
Mirka 3" Diameter Velcro Hand Sanding Pad



















Mirka 3" Diameter Velcro Hand Sanding Pad

Mirka 3" Diameter Velcro Hand Sanding Pad

Mirka 3" Diameter Velcro Hand Sanding Pad
Low-profile hook face.Fits in the palm of your hand. Yellow material is soft, and squeezable.Integral sponge-filled center.If an interface is needed for WET sanding with Mirka's Net Mesh Discs (Abranet, Abranet Soft, Autonet), use the Mirka #1033CH Interface Pad so that water can flow from the sponge to the sanding surface.If an interface is needed for WET sanding with Mirka's Net Mesh Discs (Abranet, Abranet Soft, Autonet), use the Mirka #1033CH Interface Pad so that water can flow from the sponge to the sanding surface.If an interface is needed for DRY sanding, use the Mirka #1033 Interface Pad.
Click to enlarge image(s)

This uniquely-shaped dome sanding block makes sanding or polishing by hand a breeze.

The Mirka 3" Diameter Velcro Hand Sanding Pad features a 7/8" diameter sponge, set into the pad face.  Ideal for use when wetsanding with discs that feature a cloth, foam, or mesh backing (such as Mirka Abranet, Abranet Soft, Autonet, and Abralon Discs). Water is able to readily flow through them, assisting in keeping the surface lubricated, and rinsed clean. 

When sanding with water, it's a good idea to use a trigger bottle filled with a mixture of water and diluted Meguiar's M0016 Hi-Tech Wash.

This pad is very easy to grasp, even when wet. Injection molded design is super durable (no glue is used to mount the Velcro face onto the pad... nice!) This pad is made using the same durable polymer that Mirka uses to build their backing plates.
 
   Add an Interface PAD.  Save 11%.
Use an interface pad if you're working on curved or complex shapes.  Interface pads also help to distribute applied pressure across the face of the disc.  Click the following part numbers to see the features and benefits of each interface pad:  1033 (no hole) | 1033CH (with hole)
Specifications
  • Actual diameter: 2-7/8"
  • Actual height: 1-7/8"
  • Two versions:
    Available with or without sponge
  • Backing material:
    Micro hook
  • Increase water capacity:
    When using the #1033CH Interface Pad,
    insert a cut-down sponge into the hole
    of the interface
  • Resist the urge:
    To draw "Blinky Eyeballs" onto the dome
    (Blinky is an enemy of Pac Man®)