Rupes 5" Velcro Backing Plate



















Rupes 5" Velcro Backing Plate

Rupes 5" Velcro Backing Plate

Rupes 5" Velcro Backing Plate
The Rupes® 980.027N 5" Velcro Backing Plate is a direct replacement for machines such as the LHR15lll BigFoot (Mark 3) 5" Random Orbital Polisher (shown in this photo).<br/><br/>Fits all LHR15ES (Legacy), LHR15ll (Mark 2), and LHR15lll (Mark 3) machines. This plate also fits all LHR12E BigFoot Duetto 5" Random Orbital Polishers.<br/><br/>Actual diameter is 4-7/8". Weight is 126-130 grams.<br/><br/>The "N" in its part number refers to this being the updated or "new" version of this plate. The original LHR15 machine utilized a smaller backing plate mounting pad. Therefore, this plate will fit ALL models of the Rupes 15.<br/><br/>RUPES 980.027N  5" Velcro Backing Plate. Picture of its Velcro hooks.<br/><br/>This is a direct replacement for the factory supplied 5" unit. Fits all LHR15ES (Legacy), LHR15ll (Mark 2), and LHR15lll (Mark 3) BigFoot machines. This plate also fits all LHR12E BigFoot Duetto 5" Random Orbital Polishers.<br/><br/>The "N" in its part number refers to this being the updated or "new" version of this plate. The original LHR15 machine utilized a smaller backing plate mounting pad. This plate fits ALL models of the Rupes LHR12E and LHR15. Actual diameter is 4-7/8". Weight is 126-130 grams.<br/><br/>RUPES 980.027N  5" Velcro Backing Plate. Picture of its backside (blue friction ring, gray hub).<br/><br/>This is a direct replacement for the factory supplied 5" unit. Fits all LHR15ES (Legacy), LHR15ll (Mark 2), and LHR15lll (Mark 3) BigFoot machines. This plate also fits all LHR12E BigFoot Duetto 5" Random Orbital Polishers.<br/><br/>The "N" in its part number refers to this being the updated or "new" version of this plate. The original LHR15 and Duetto machines utilized a smaller backing plate mounting pad . This plate fits ALL models of the Rupes LHR12E and LHR15. Actual diameter is 4-7/8". Weight is 126-130 grams.<br/><br/>The Rupes® 980.027 5" Velcro Backing Plate, and the Rupes® 981.321N 6" Velcro Backing Plate are SUPER STURDY, and long lasting. However, they can eventually wear out, or break if the machine is dropped.<br/><br/>The 5" plate fits all LHR15ES (Legacy), LHR15ll (Mark 2), and LHR15lll (Mark 3) BigFoot machines. It also fits all LHR12E BigFoot Duetto 5" Random Orbital Polishers.<br/><br/>The 6" plate fits all LHR21ES (Legacy), LHR21ll (Mark 2), and LHR21lll (Mark 3) BigFoot machines. <br/><br/>Since the mounting pads are identical (and both plates are virtually identical in weight), either will mount & perform well on 5" and 6" versions of the BigFoot machine.<br/><br/>
Click to enlarge image(s)


BigFoot's powerful dance moves can be tough on shoes.

The Rupes® BigFoot series of 5" Random Orbital Polishers are impressive performers. They deliver a 12 to 15mm diameter orbit, and can generate massive momentum. Some models of the LHR15 top out at 5,300 orbits per minute (OPM), while the LHR12E Duetto extends to 5,500 OPM! A stressful situation, for any backing plate.

After extended use, the factory installed backing plate can degrade.
An accidental dropping of the machine can bend or break the plate.

You'll be dead in the water unless you've got a replacement on hand.
This is a factory-direct replacement Velcro backing plate.

The Rupes® 980.027 5" Velcro Backing Plate is made specifically for use with the following machines:

Rupes® BigFoot Legacy 5" Random Orbital Polisher LHR15ES
Rupes® BigFoot Markll 5" Random Orbital Polisher (LHR15ll)
Rupes® BigFoot Marklll 5" Random Orbital Polisher LHR15lll
Rupes® BigFoot Duetto 5" Random Orbital Polisher LHR12E

Also fits:
Rupes® BigFoot Legacy 6" Random Orbital Polisher LHR21ES
Rupes® BigFoot Markll 6" Random Orbital Polisher (LHR21l)
Rupes® BigFoot Marklll 6" Random Orbital Polisher LHR21lll

    Looking for a 6" version of this plate?  
Check out the 981.321N Rupes 6" Velcro Backing Plate.
Specifications
  • Actual diameter: 4-7/8" (125mm)

  • Attachment material:
    Velcro®- low profile hook
  • Weight: 126g approximate (4.45 oz.)

  • Extra hold hook material:
    Carefully remove polishing pads to avoid damaging the loop material