Part Number:
9.BF150U
Use pad to:
1-STEP C/P/F
Diameter:
130/150mm
Pad Material:
OPEN CELL FOAM
5" Gray UHS Ultra High Solid Solid 1-Step Polishing Pad
Designed specifically for use with Rupes UHS Ultra High Solid Solid Surface Polishing Compound, but can also be used with a variety of buffing liquids. Feels simliar to a very firm memory foam, but becomes soft and pliable as the pad warms & saturates. Cuts remarkably well, yet leaves a scour-free finish.
Price:
$12.95
Qty:

Rupes 5" Foam Buffing Pads

Rupes 5" Foam Buffing Pads

Rupes 5" Foam Buffing Pads
This illustration pertaining to the Rupes 130/150mm 5" Foam Buffing Pads includes VERY accurate "weight & measures" information. I weighed and measured the pads myself (and made this illustration as well!)
Click to enlarge image(s)
These foam pads are built for high-speed WIGGLING!

Large-stroke random orbital machines can really run a foam pad through its paces.  Rupes® designed these pads to perform exceptionally well with their wonderful line of BigFoot® large-stroke random orbital machines.

Rupes Foam Pads feature angle-cut sides, so they fit into tight areas with ease.  The sharply angled shape also eliminates mass, which aids in  maintaining backing plate rotational speed.  With the excess foam removed from the pad, both the pad and machine feel more agile during use, particularly during high-speed polishing.

Rupes Foam Pads are available in four sizes:

• 2.5" (62mm/70mm)
3" (80mm/100mm)
5" (130mm/150mm)
6" (155mm/180mm)

The  blue  pad is designated by Rupes as being a hard cutting pad.  It is a large-pore, thick-wall design.  This pad initially feels very rigid, but becomes more pliable and comfortable to use as the pad warms and saturates with buffing liquid.  The wide open-cell design of this pad keeps it clog-free longer than traditional foam cutting pads, but it may sling a bit if too much compound is used.  To control slinging, do not oversaturate or use an excess amount of compound with this pad.

The  green  pad is designated as being an intermediate cutting pad.  Compared to the blue pad, this pad utilizes a much smaller pore structure, and feels softer to the touch.  Its performance characteristics are more in line with a typical high quality USA-made foam cutting pad.  The green pad can leave a very nice finish, requiring only minimal follow-up polishing.  Many users of this pad have reported it to be their favorite Rupes pad.

The  yellow  pad is designated as being a medium or fine polishing pad.  For general polishing duties, this pad is tough to beat.  It can be used with heavy-cut compounds or finesse-polishes with great success, and should be a staple in your pad arsenal.

The  white  pad is designated as being a soft or ultra-fine finishing pad.
It is very soft and pliable, and is the perfect choice for use on difficult-to-finish paint types.

The   gray   foam pad (no photos shown yet, not available in 2.5") is the new for 2015 UHS Pad, and was designed specifically for use with Rupes UHS Ultra High Solid Solid Surface Polishing Compound. It can also be used with a variety of buffing liquids, including Rupes Zephr, Quarz, and Keramik Buffing Gels. This pad is very dense, and feels simliar to a very firm memory foam.  As it warms during use, it becomes soft and pliable, enabling it to cut remarkably well, yet leave a scour-free finish. This pad should be cleaned often during use, in order to avoid saturation of the foam. Otherwise, the pad can be difficult to clean, because it does not collapse and recoil rapidly.

To view all Rupes pads, visit the Rupes Buffing Pads Page.
To view our entire buffing pad lineup, visit the Buffing Pad Main Page.

Quantity Price
1 - 3
$12.95
4+
$10.99

Part Number:
9.BF150H
Use pad to:
CUT
Diameter:
130/150mm
Pad Material:
OPEN CELL FOAM
5" Blue Coarse Cutting Pad
This pad is rigid, but becomes very pliable as the pad warms & saturates. It features large-pores, with thick-walls of foam residing between the pores. Remains clog-free compared to traditional cutting pads. Ideal for use on heavily oxidized or vast surfaces. In most instances, leaves a haze-free finish.
Price:
$12.95
Qty:

Rupes 5" Foam Buffing Pads

Rupes 5" Foam Buffing Pads

Rupes 5" Foam Buffing Pads
This illustration pertaining to the Rupes 130/150mm 5" Foam Buffing Pads includes VERY accurate "weight & measures" information. I weighed and measured the pads myself (and made this illustration as well!)
Click to enlarge image(s)
These foam pads are built for high-speed WIGGLING!

Large-stroke random orbital machines can really run a foam pad through its paces.  Rupes® designed these pads to perform exceptionally well with their wonderful line of BigFoot® large-stroke random orbital machines.

Rupes Foam Pads feature angle-cut sides, so they fit into tight areas with ease.  The sharply angled shape also eliminates mass, which aids in  maintaining backing plate rotational speed.  With the excess foam removed from the pad, both the pad and machine feel more agile during use, particularly during high-speed polishing.

Rupes Foam Pads are available in four sizes:

• 2.5" (62mm/70mm)
3" (80mm/100mm)
5" (130mm/150mm)
6" (155mm/180mm)

The  blue  pad is designated by Rupes as being a hard cutting pad.  It is a large-pore, thick-wall design.  This pad initially feels very rigid, but becomes more pliable and comfortable to use as the pad warms and saturates with buffing liquid.  The wide open-cell design of this pad keeps it clog-free longer than traditional foam cutting pads, but it may sling a bit if too much compound is used.  To control slinging, do not oversaturate or use an excess amount of compound with this pad.

The  green  pad is designated as being an intermediate cutting pad.  Compared to the blue pad, this pad utilizes a much smaller pore structure, and feels softer to the touch.  Its performance characteristics are more in line with a typical high quality USA-made foam cutting pad.  The green pad can leave a very nice finish, requiring only minimal follow-up polishing.  Many users of this pad have reported it to be their favorite Rupes pad.

The  yellow  pad is designated as being a medium or fine polishing pad.  For general polishing duties, this pad is tough to beat.  It can be used with heavy-cut compounds or finesse-polishes with great success, and should be a staple in your pad arsenal.

The  white  pad is designated as being a soft or ultra-fine finishing pad.
It is very soft and pliable, and is the perfect choice for use on difficult-to-finish paint types.

The   gray   foam pad (no photos shown yet, not available in 2.5") is the new for 2015 UHS Pad, and was designed specifically for use with Rupes UHS Ultra High Solid Solid Surface Polishing Compound. It can also be used with a variety of buffing liquids, including Rupes Zephr, Quarz, and Keramik Buffing Gels. This pad is very dense, and feels simliar to a very firm memory foam.  As it warms during use, it becomes soft and pliable, enabling it to cut remarkably well, yet leave a scour-free finish. This pad should be cleaned often during use, in order to avoid saturation of the foam. Otherwise, the pad can be difficult to clean, because it does not collapse and recoil rapidly.

To view all Rupes pads, visit the Rupes Buffing Pads Page.
To view our entire buffing pad lineup, visit the Buffing Pad Main Page.

Quantity Price
1 - 3
$12.95
4+
$10.99

Part Number:
9.BF150J
Use pad to:
CUT
Diameter:
130/150mm
Pad Material:
OPEN CELL FOAM
5" Green Intermediate Cutting Pad
Compared to the Rupes Blue Coarse Cutting Pad, this pad utilizes a much smaller pore structure, and feels softer to the touch. Its performance characteristics are more in line with a typical high quality USA-made foam cutting pad. Leaves a very nice finish, usually requiring minimal follow-up polishing.
Price:
$12.95
Qty:

Rupes 5" Foam Buffing Pads

Rupes 5" Foam Buffing Pads

Rupes 5" Foam Buffing Pads
This illustration pertaining to the Rupes 130/150mm 5" Foam Buffing Pads includes VERY accurate "weight & measures" information. I weighed and measured the pads myself (and made this illustration as well!)
Click to enlarge image(s)
These foam pads are built for high-speed WIGGLING!

Large-stroke random orbital machines can really run a foam pad through its paces.  Rupes® designed these pads to perform exceptionally well with their wonderful line of BigFoot® large-stroke random orbital machines.

Rupes Foam Pads feature angle-cut sides, so they fit into tight areas with ease.  The sharply angled shape also eliminates mass, which aids in  maintaining backing plate rotational speed.  With the excess foam removed from the pad, both the pad and machine feel more agile during use, particularly during high-speed polishing.

Rupes Foam Pads are available in four sizes:

• 2.5" (62mm/70mm)
3" (80mm/100mm)
5" (130mm/150mm)
6" (155mm/180mm)

The  blue  pad is designated by Rupes as being a hard cutting pad.  It is a large-pore, thick-wall design.  This pad initially feels very rigid, but becomes more pliable and comfortable to use as the pad warms and saturates with buffing liquid.  The wide open-cell design of this pad keeps it clog-free longer than traditional foam cutting pads, but it may sling a bit if too much compound is used.  To control slinging, do not oversaturate or use an excess amount of compound with this pad.

The  green  pad is designated as being an intermediate cutting pad.  Compared to the blue pad, this pad utilizes a much smaller pore structure, and feels softer to the touch.  Its performance characteristics are more in line with a typical high quality USA-made foam cutting pad.  The green pad can leave a very nice finish, requiring only minimal follow-up polishing.  Many users of this pad have reported it to be their favorite Rupes pad.

The  yellow  pad is designated as being a medium or fine polishing pad.  For general polishing duties, this pad is tough to beat.  It can be used with heavy-cut compounds or finesse-polishes with great success, and should be a staple in your pad arsenal.

The  white  pad is designated as being a soft or ultra-fine finishing pad.
It is very soft and pliable, and is the perfect choice for use on difficult-to-finish paint types.

The   gray   foam pad (no photos shown yet, not available in 2.5") is the new for 2015 UHS Pad, and was designed specifically for use with Rupes UHS Ultra High Solid Solid Surface Polishing Compound. It can also be used with a variety of buffing liquids, including Rupes Zephr, Quarz, and Keramik Buffing Gels. This pad is very dense, and feels simliar to a very firm memory foam.  As it warms during use, it becomes soft and pliable, enabling it to cut remarkably well, yet leave a scour-free finish. This pad should be cleaned often during use, in order to avoid saturation of the foam. Otherwise, the pad can be difficult to clean, because it does not collapse and recoil rapidly.

To view all Rupes pads, visit the Rupes Buffing Pads Page.
To view our entire buffing pad lineup, visit the Buffing Pad Main Page.

Quantity Price
1 - 3
$12.95
4+
$10.99

Part Number:
9.BF150M
Use pad to:
POLISH / FINISH
Diameter:
130/150mm
Pad Material:
OPEN CELL FOAM
5" Yellow Fine Polishing Pad
SUPERB, A+ rated, non-marring pad! For general polishing tasks, this pad is PERFECT. Although designated as a medium to fine polishing pad, it can be confidently used with hi-tech compounds and finessing polishes. UNBEATABLE for working on finicky paints via large stroke random orbital polisher.
Price:
$12.95
Qty:

Rupes 5" Foam Buffing Pads

Rupes 5" Foam Buffing Pads

Rupes 5" Foam Buffing Pads
This illustration pertaining to the Rupes 130/150mm 5" Foam Buffing Pads includes VERY accurate "weight & measures" information. I weighed and measured the pads myself (and made this illustration as well!)
Click to enlarge image(s)
These foam pads are built for high-speed WIGGLING!

Large-stroke random orbital machines can really run a foam pad through its paces.  Rupes® designed these pads to perform exceptionally well with their wonderful line of BigFoot® large-stroke random orbital machines.

Rupes Foam Pads feature angle-cut sides, so they fit into tight areas with ease.  The sharply angled shape also eliminates mass, which aids in  maintaining backing plate rotational speed.  With the excess foam removed from the pad, both the pad and machine feel more agile during use, particularly during high-speed polishing.

Rupes Foam Pads are available in four sizes:

• 2.5" (62mm/70mm)
3" (80mm/100mm)
5" (130mm/150mm)
6" (155mm/180mm)

The  blue  pad is designated by Rupes as being a hard cutting pad.  It is a large-pore, thick-wall design.  This pad initially feels very rigid, but becomes more pliable and comfortable to use as the pad warms and saturates with buffing liquid.  The wide open-cell design of this pad keeps it clog-free longer than traditional foam cutting pads, but it may sling a bit if too much compound is used.  To control slinging, do not oversaturate or use an excess amount of compound with this pad.

The  green  pad is designated as being an intermediate cutting pad.  Compared to the blue pad, this pad utilizes a much smaller pore structure, and feels softer to the touch.  Its performance characteristics are more in line with a typical high quality USA-made foam cutting pad.  The green pad can leave a very nice finish, requiring only minimal follow-up polishing.  Many users of this pad have reported it to be their favorite Rupes pad.

The  yellow  pad is designated as being a medium or fine polishing pad.  For general polishing duties, this pad is tough to beat.  It can be used with heavy-cut compounds or finesse-polishes with great success, and should be a staple in your pad arsenal.

The  white  pad is designated as being a soft or ultra-fine finishing pad.
It is very soft and pliable, and is the perfect choice for use on difficult-to-finish paint types.

The   gray   foam pad (no photos shown yet, not available in 2.5") is the new for 2015 UHS Pad, and was designed specifically for use with Rupes UHS Ultra High Solid Solid Surface Polishing Compound. It can also be used with a variety of buffing liquids, including Rupes Zephr, Quarz, and Keramik Buffing Gels. This pad is very dense, and feels simliar to a very firm memory foam.  As it warms during use, it becomes soft and pliable, enabling it to cut remarkably well, yet leave a scour-free finish. This pad should be cleaned often during use, in order to avoid saturation of the foam. Otherwise, the pad can be difficult to clean, because it does not collapse and recoil rapidly.

To view all Rupes pads, visit the Rupes Buffing Pads Page.
To view our entire buffing pad lineup, visit the Buffing Pad Main Page.

Quantity Price
1 - 3
$12.95
4+
$10.99

Part Number:
DFC5
Use pad to:
CUT
Diameter:
5"
Pad Material:
OPEN CELL FOAM
5" DA Foam Cutting Disc
Super-low profile design allows efficient delivery of a machine's orbital motion, which is especially important when using small stroke orbital-action machines. This pad removes material quickly, but leaves a very nice finish. Maroon foam is firm and dense compared to its yellow and black counterparts.
Price:
$11.00
Qty:

Meguiar's 5" Professional Soft Buff DA Foam Discs

Meguiar's 5" Professional Soft Buff DA Foam Discs

Meguiar's 5" Professional Soft Buff DA Foam Discs
Click to enlarge image(s)

HI-TECH. LOW PROFILE. 

Date line, 1965: "Meguiar's Introduces the Buffmaster Wooless Wonder!"

Meguiar's 5" Professional Soft Buff DA Foam Discs are the latest series of pad offered by the marvelous minds at Meguiar's. Three grades of foam ensure that just about any polishing task can be comfortably & efficiently accomplished. They can be used with a wide variety of buffing liquids (compounds, polishes, waxes), and are machine washable.

   Meguiar's 5" Maroon DA Foam Cutting Discs. 
Typical foam cutting pads can leave paint surfaces scoured with a layer of fine, hazy scratch marks. Not so with these beauties! Remarkably, Meguiar's 5" DA Foam Cutting Discs will rarely scour even the most delicate of paint finishes.

   Meguiar's 5" Yellow DA Foam Polishing Discs. 
It's no secret that Meguiar's Foam Polishing Pads have been an industry standard for decades. Compared to their maroon counterparts, Meguiar's 5" Yellow DA Foam Polishing Discs feature improved contourability. A great choice for general polishing tasks. 

   Meguiar's 5" Black DA Foam Finishing Discs. 
Newly formulated foam is superior to all previous offerings (no small feat!). Fast becoming the go-to pad for high grade, critical polishing tasks. Non-marring, low-clog foam. The perfect choice for final polishing tasks, or for applying glazes, polishes, waxes, and sealants.

   For optimum performance:
This pad should be used in conjunction with a Meguiar's Professonal Backing Plate.

For use with random orbital or dual action machines:
• Meguiar's DBP5 Soft Buff 5" D/A Polisher Backing Plate.
• Meguiar's W67DA Professional 5" D/A Polisher Backing Plate.

For use with rotary machines:
• Meguiar's W64 Professional 5" Rotary Polisher Backing Plate.

Note: Remove centering hub from backing plate when used in conjunction with these pads!

   Need more versatility?  
Check out the Meguiar's DA Microfiber Correction System here.

   Need these pads in 6" diameter?
Check out the Meguiar's 6" Soft Buff DA Foam Discs here.

To view our entire buffing pad lineup, visit the Buffing Pad Main Page.

Specifications
Actual diameter: 7" Actual height: 1"
Attachment material: low profile loop Attachment material diameter: 5-1/8"
Indent for backing plate:
5-15/16" diameter
Color code:
maroon pad: for cutting or leveling
yellow pad: for general or contour polishing
black pad: for contour or finish polishing
Recommended Rotary Backing Plate:
Meguiar's W68 6" Rotary Polisher Backing Plate
Recommended D/A Backing Plate:
Meguiar's W68DA Professional 6" D/A Backing Plate

Part Number:
DFP5
Use pad to:
POLISH
Diameter:
5"
Pad Material:
OPEN CELL FOAM
5" DA Foam Polishing Disc
Super-low profile design allows efficient delivery of a machine's orbital motion, which is especially important when using small stroke orbital-action machines. Meguiar's yellow pads have been the industry standard for decades. This pad is super versatile! Use it to apply compounds, polishes, one-step formulations, and finishing waxes.
Price:
$11.00
Qty:

Meguiar's 5" Professional Soft Buff DA Foam Discs

Meguiar's 5" Professional Soft Buff DA Foam Discs

Meguiar's 5" Professional Soft Buff DA Foam Discs
Click to enlarge image(s)

HI-TECH. LOW PROFILE. 

Date line, 1965: "Meguiar's Introduces the Buffmaster Wooless Wonder!"

Meguiar's 5" Professional Soft Buff DA Foam Discs are the latest series of pad offered by the marvelous minds at Meguiar's. Three grades of foam ensure that just about any polishing task can be comfortably & efficiently accomplished. They can be used with a wide variety of buffing liquids (compounds, polishes, waxes), and are machine washable.

   Meguiar's 5" Maroon DA Foam Cutting Discs. 
Typical foam cutting pads can leave paint surfaces scoured with a layer of fine, hazy scratch marks. Not so with these beauties! Remarkably, Meguiar's 5" DA Foam Cutting Discs will rarely scour even the most delicate of paint finishes.

   Meguiar's 5" Yellow DA Foam Polishing Discs. 
It's no secret that Meguiar's Foam Polishing Pads have been an industry standard for decades. Compared to their maroon counterparts, Meguiar's 5" Yellow DA Foam Polishing Discs feature improved contourability. A great choice for general polishing tasks. 

   Meguiar's 5" Black DA Foam Finishing Discs. 
Newly formulated foam is superior to all previous offerings (no small feat!). Fast becoming the go-to pad for high grade, critical polishing tasks. Non-marring, low-clog foam. The perfect choice for final polishing tasks, or for applying glazes, polishes, waxes, and sealants.

   For optimum performance:
This pad should be used in conjunction with a Meguiar's Professonal Backing Plate.

For use with random orbital or dual action machines:
• Meguiar's DBP5 Soft Buff 5" D/A Polisher Backing Plate.
• Meguiar's W67DA Professional 5" D/A Polisher Backing Plate.

For use with rotary machines:
• Meguiar's W64 Professional 5" Rotary Polisher Backing Plate.

Note: Remove centering hub from backing plate when used in conjunction with these pads!

   Need more versatility?  
Check out the Meguiar's DA Microfiber Correction System here.

   Need these pads in 6" diameter?
Check out the Meguiar's 6" Soft Buff DA Foam Discs here.

To view our entire buffing pad lineup, visit the Buffing Pad Main Page.

Specifications
Actual diameter: 7" Actual height: 1"
Attachment material: low profile loop Attachment material diameter: 5-1/8"
Indent for backing plate:
5-15/16" diameter
Color code:
maroon pad: for cutting or leveling
yellow pad: for general or contour polishing
black pad: for contour or finish polishing
Recommended Rotary Backing Plate:
Meguiar's W68 6" Rotary Polisher Backing Plate
Recommended D/A Backing Plate:
Meguiar's W68DA Professional 6" D/A Backing Plate

Part Number:
DFF5
Use pad to:
FINISH
Diameter:
5"
Pad Material:
OPEN CELL FOAM
5" DA Foam Finishing Disc
Super-low profile design allows efficient delivery of a machine's orbital motion to the paint surface (especially important when using small stroke orbital-action machines). This pad was designed to apply waxes, sealants, and very fine polishes. The soft and contourable foam will not mar delicate surfaces. Note: cutting power is virtually non-existant.
Price:
$11.00
Qty:

Meguiar's 5" Professional Soft Buff DA Foam Discs

Meguiar's 5" Professional Soft Buff DA Foam Discs

Meguiar's 5" Professional Soft Buff DA Foam Discs
Click to enlarge image(s)

HI-TECH. LOW PROFILE. 

Date line, 1965: "Meguiar's Introduces the Buffmaster Wooless Wonder!"

Meguiar's 5" Professional Soft Buff DA Foam Discs are the latest series of pad offered by the marvelous minds at Meguiar's. Three grades of foam ensure that just about any polishing task can be comfortably & efficiently accomplished. They can be used with a wide variety of buffing liquids (compounds, polishes, waxes), and are machine washable.

   Meguiar's 5" Maroon DA Foam Cutting Discs. 
Typical foam cutting pads can leave paint surfaces scoured with a layer of fine, hazy scratch marks. Not so with these beauties! Remarkably, Meguiar's 5" DA Foam Cutting Discs will rarely scour even the most delicate of paint finishes.

   Meguiar's 5" Yellow DA Foam Polishing Discs. 
It's no secret that Meguiar's Foam Polishing Pads have been an industry standard for decades. Compared to their maroon counterparts, Meguiar's 5" Yellow DA Foam Polishing Discs feature improved contourability. A great choice for general polishing tasks. 

   Meguiar's 5" Black DA Foam Finishing Discs. 
Newly formulated foam is superior to all previous offerings (no small feat!). Fast becoming the go-to pad for high grade, critical polishing tasks. Non-marring, low-clog foam. The perfect choice for final polishing tasks, or for applying glazes, polishes, waxes, and sealants.

   For optimum performance:
This pad should be used in conjunction with a Meguiar's Professonal Backing Plate.

For use with random orbital or dual action machines:
• Meguiar's DBP5 Soft Buff 5" D/A Polisher Backing Plate.
• Meguiar's W67DA Professional 5" D/A Polisher Backing Plate.

For use with rotary machines:
• Meguiar's W64 Professional 5" Rotary Polisher Backing Plate.

Note: Remove centering hub from backing plate when used in conjunction with these pads!

   Need more versatility?  
Check out the Meguiar's DA Microfiber Correction System here.

   Need these pads in 6" diameter?
Check out the Meguiar's 6" Soft Buff DA Foam Discs here.

To view our entire buffing pad lineup, visit the Buffing Pad Main Page.

Specifications
Actual diameter: 7" Actual height: 1"
Attachment material: low profile loop Attachment material diameter: 5-1/8"
Indent for backing plate:
5-15/16" diameter
Color code:
maroon pad: for cutting or leveling
yellow pad: for general or contour polishing
black pad: for contour or finish polishing
Recommended Rotary Backing Plate:
Meguiar's W68 6" Rotary Polisher Backing Plate
Recommended D/A Backing Plate:
Meguiar's W68DA Professional 6" D/A Backing Plate

Part Number:
DMC5
Use pad to:
CUT / POLISH
Diameter:
5 - 1/2"
Pad Material:
MICROFIBER
(2-pack) 5" DA Microfiber Cutting Discs (2-pack)
Designed for use with dual-action and orbital machines, these discs can deliver rotary-polisher performance without the treacherous learning curve and heat-generating speeds associated with rotary machines.  This is a cutting disc, which means it was designed for quick and accurate removal of swirls, scratches, and other light to moderate surface defects.
Price:
$21.98/pair
Qty:

Meguiar's 5" DA Microfiber Cutting Discs

Meguiar's 5" DA Microfiber Cutting Discs

Meguiar's 5" DA Microfiber Cutting Discs
Click to enlarge image(s)

Polishing paint will never be the same.

Meguiar's DA Microfiber Cutting Discs are designed for use with dual-action and orbital machines. These discs allow the average Joe to polish paint like a buffing guruHow big a deal are these fuzzy little discs?  Well, without sounding ridiculous or overblowing things...

I'd say they're black magic BIG.

Quite a statement, but I have approximately 25 years of polishing experience under my belt, so take it for what its worth. When used properly, these discs can deliver rotary-like cutting speed, without the treacherous learning curve and heat-generating speeds associated with rotary machines. 

This is a cutting disc, which means it was designed for quick and accurate removal of swirls, scratches, and other light to moderate surface defects. Although these pads have been optimized for use with Meguiar's DA Correction Compound, they work incredibly well with other D/A compatible compounds and polishes.  Meguiar's DA Microfiber Cutting Discs are machine washable, so they can be used over and over, making them a great value.

Two discs per pack.  Save 10% per disc when you buy a 12 disc bulk pack!

Easy to use, safe on edges, & jaw dropping performance.  What are you waiting for?

Looking for a different size disc?

These discs are also available in 3" and 6" versions.

For final polishing: 
Follow up with a Meguiar's DMF5 5" DA Microfiber Finishing Disc and D301 DA Microfiber Finishing Wax.

Need a backing plate that will optimize pad performance?
Check out the recommended Meguiar's W67DA Professional 5" D/A Polisher Backing Plate.

Looking for maximum cutting ability?
Check out an Exact-Fit Backing Plate! We offer these custom made plates for 5/16-24 thread, as well as for Rupes® BigFoot machines.

Great deals!
Check out our Meguiar's DA Microfiber Combo Packs.

To view our entire buffing pad lineup, visit the Buffing Pad Main Page.

Specifications
Actual pad diameter: 5-1/2" No swirls…guaranteed!*
*See package for details
Actual pad height: 5/8" Recommended compound:
Meguiar's D300 DA Microfiber Correction Compound
Attachment material: low-profile loop
Compatible with all hook-style backing
plates
Safe to use:
Okay for use with all D/A compatible compounds and polishes
Recommended backing plate:
Meguiar's W67DA 5" Professional
D/A Backing Plate
For final polishing:
Follow up with Meguiar's DMF5 DA Microfiber Finishing Disc and D301 DA Microfiber Finishing Wax
Durable and washable:
Can be washed via hand, pad cleaning
machine, or washing machine
Do not use fabric softener or bleach!
For metal polishing:
Use a dedicated pad for metal polishing- do not use for polishing paint once pad has been used for metal polishing!
Clean often!
For optimal cleaning:
Blow disc clean using compressed air

If compressed air is not available, agitate microfibers using a soft bristled nylon brush,
then place disc face onto a microfiber towel and run pad against it using a low-speed machine setting

Clean until disc looks debris-free and fluffy
Use caution when cleaning pads!
Debris can fling at high speed and lodge into eyes- wear eye protection

If cleaning discs by placing the face of the disc into a towel and running the machine, make certain that the towel does not come into contact with the machine's drive spindle

Part Number:
DMC5B
Use pad to:
CUT / POLISH
Diameter:
5 - 1/2"
Pad Material:
MICROFIBER
(12-pack) 5" DA Microfiber Cutting Discs (12-pack)
Designed for use with dual-action and orbital machines, these discs can deliver rotary-polisher performance without the treacherous learning curve and heat-generating speeds associated with rotary machines.  This is a cutting disc, which means it was designed for quick and accurate removal of swirls, scratches, and other light to moderate surface defects.
Price:
$118.69/doz
Qty:

Meguiar's 5" DA Microfiber Cutting Discs

Meguiar's 5" DA Microfiber Cutting Discs

Meguiar's 5" DA Microfiber Cutting Discs
Click to enlarge image(s)

Polishing paint will never be the same.

Meguiar's DA Microfiber Cutting Discs are designed for use with dual-action and orbital machines. These discs allow the average Joe to polish paint like a buffing guruHow big a deal are these fuzzy little discs?  Well, without sounding ridiculous or overblowing things...

I'd say they're black magic BIG.

Quite a statement, but I have approximately 25 years of polishing experience under my belt, so take it for what its worth. When used properly, these discs can deliver rotary-like cutting speed, without the treacherous learning curve and heat-generating speeds associated with rotary machines. 

This is a cutting disc, which means it was designed for quick and accurate removal of swirls, scratches, and other light to moderate surface defects. Although these pads have been optimized for use with Meguiar's DA Correction Compound, they work incredibly well with other D/A compatible compounds and polishes.  Meguiar's DA Microfiber Cutting Discs are machine washable, so they can be used over and over, making them a great value.

Two discs per pack.  Save 10% per disc when you buy a 12 disc bulk pack!

Easy to use, safe on edges, & jaw dropping performance.  What are you waiting for?

Looking for a different size disc?

These discs are also available in 3" and 6" versions.

For final polishing: 
Follow up with a Meguiar's DMF5 5" DA Microfiber Finishing Disc and D301 DA Microfiber Finishing Wax.

Need a backing plate that will optimize pad performance?
Check out the recommended Meguiar's W67DA Professional 5" D/A Polisher Backing Plate.

Looking for maximum cutting ability?
Check out an Exact-Fit Backing Plate! We offer these custom made plates for 5/16-24 thread, as well as for Rupes® BigFoot machines.

Great deals!
Check out our Meguiar's DA Microfiber Combo Packs.

To view our entire buffing pad lineup, visit the Buffing Pad Main Page.

Specifications
Actual pad diameter: 5-1/2" No swirls…guaranteed!*
*See package for details
Actual pad height: 5/8" Recommended compound:
Meguiar's D300 DA Microfiber Correction Compound
Attachment material: low-profile loop
Compatible with all hook-style backing
plates
Safe to use:
Okay for use with all D/A compatible compounds and polishes
Recommended backing plate:
Meguiar's W67DA 5" Professional
D/A Backing Plate
For final polishing:
Follow up with Meguiar's DMF5 DA Microfiber Finishing Disc and D301 DA Microfiber Finishing Wax
Durable and washable:
Can be washed via hand, pad cleaning
machine, or washing machine
Do not use fabric softener or bleach!
For metal polishing:
Use a dedicated pad for metal polishing- do not use for polishing paint once pad has been used for metal polishing!
Clean often!
For optimal cleaning:
Blow disc clean using compressed air

If compressed air is not available, agitate microfibers using a soft bristled nylon brush,
then place disc face onto a microfiber towel and run pad against it using a low-speed machine setting

Clean until disc looks debris-free and fluffy
Use caution when cleaning pads!
Debris can fling at high speed and lodge into eyes- wear eye protection

If cleaning discs by placing the face of the disc into a towel and running the machine, make certain that the towel does not come into contact with the machine's drive spindle

Part Number:
DMF5
Use pad to:
POLISH / FINISH
Diameter:
5 - 1/2"
Pad Material:
MICROFIBER
(2-pack) 5" DA Microfiber Finishing Discs (2-pack)
Designed for use with dual-action and orbital machines, these discs can deliver rotary-polisher performance without the treacherous learning curve and heat-generating speeds associated with rotary machines. This is a finishing disc, which means it was designed for use with fine polishes, glazes, waxes, and sealants.
Price:
$21.98/pair
Qty:

Meguiar's 5" DA Microfiber Finishing Discs

Meguiar's 5" DA Microfiber Finishing Discs

Meguiar's 5" DA Microfiber Finishing Discs
Click to enlarge image(s)
It's like buffing with whipped cream & cotton balls.

These discs are remarkably soft.  Designed for use with dual-action and orbital machines, they make short work of final polishing and waxing.

In most cases, they will replace your foam polishing and finishing pads.  In fact, they're so capable that you may never reach for a foam pad again!

This is a finishing disc, which means it was designed to remove light swirling or oxidation prior to waxing.  They can also be used for final waxing.

Although these discs have been optimized for use with Meguiar's DA Microfiber Finishing Wax, they work incredibly well with other D/A compatible polishes and waxes.  Machine washable, so they can be used over and over, making them a great value.

Two discs per pack.  Save 10% per disc when you buy a 12 disc bulk pack!

Comfortable to use, powerful yet gentle performance.  What else could you possibly want?

Looking for a different size disc?
These discs are also available in 3" and 6" versions.

Need more cutting power?
Start with a Meguiar's DMC5 5" DA Microfiber Cutting Disc.
Pair it with Meguiar's D300 DA Microfiber Correction Compound.

Need a backing plate that will optimize pad performance?
Check out the Meguiar's W67DA Professional 5" DA Backing Plate.

Great deals!
Check out our DA Microfiber Combo Pack.

To view our entire buffing pad lineup, visit the Buffing Pad Main Page.

Specifications
Actual pad diameter: 5-1/2" No swirls…guaranteed!*
*See package for details
Actual pad height: 3/4" Recommended polish/wax:
Meguiar's D301 DA Microfiber Finishing Wax
Attachment material: low-profile loop
Compatible with all hook-style backing
plates
Safe to use:
Okay for use with all D/A compatible polishes and waxes
Recommended backing plate:
Meguiar's W67DA Professional 5"
DA Backing Plate
For defect removal prior to polishing:
Buff using Meguiar's DMC5 DA Microfiber Cutting Disc and D300 DA Microfiber Correction Compound
Durable and washable:
Can be washed via hand, pad cleaning
machine, or washing machine
Do not use fabric softener or bleach!
For metal polishing:
Use a dedicated pad for metal polishing- do not use for polishing paint once pad has been used for metal polishing!
Clean often!
For optimal cleaning:
Blow disc clean using compressed air

If compressed air is not available, agitate microfibers using a soft bristled nylon brush,
then place disc face onto a microfiber towel and run pad against it using a low-speed machine setting

Clean until disc looks debris-free and fluffy
Use caution when cleaning pads!
Debris can fling at high speed and lodge into eyes- wear eye protection

If cleaning discs by placing the face of the disc into a towel and running the machine, make certain that the towel does not come into contact with the machine's drive spindle

Part Number:
DMF5B
Use pad to:
POLISH / FINISH
Diameter:
5 - 1/2"
Pad Material:
MICROFIBER
(12-pack) 6" DA Microfiber Finishing Discs (12-pack)
Designed for use with dual-action and orbital machines, these discs can deliver rotary-polisher performance without the treacherous learning curve and heat-generating speeds associated with rotary machines. This is a finishing disc, which means it was designed for use with fine polishes, glazes, waxes, and sealants.
Price:
$118.69/doz
Qty:

Meguiar's 5" DA Microfiber Finishing Discs

Meguiar's 5" DA Microfiber Finishing Discs

Meguiar's 5" DA Microfiber Finishing Discs
Click to enlarge image(s)
It's like buffing with whipped cream & cotton balls.

These discs are remarkably soft.  Designed for use with dual-action and orbital machines, they make short work of final polishing and waxing.

In most cases, they will replace your foam polishing and finishing pads.  In fact, they're so capable that you may never reach for a foam pad again!

This is a finishing disc, which means it was designed to remove light swirling or oxidation prior to waxing.  They can also be used for final waxing.

Although these discs have been optimized for use with Meguiar's DA Microfiber Finishing Wax, they work incredibly well with other D/A compatible polishes and waxes.  Machine washable, so they can be used over and over, making them a great value.

Two discs per pack.  Save 10% per disc when you buy a 12 disc bulk pack!

Comfortable to use, powerful yet gentle performance.  What else could you possibly want?

Looking for a different size disc?
These discs are also available in 3" and 6" versions.

Need more cutting power?
Start with a Meguiar's DMC5 5" DA Microfiber Cutting Disc.
Pair it with Meguiar's D300 DA Microfiber Correction Compound.

Need a backing plate that will optimize pad performance?
Check out the Meguiar's W67DA Professional 5" DA Backing Plate.

Great deals!
Check out our DA Microfiber Combo Pack.

To view our entire buffing pad lineup, visit the Buffing Pad Main Page.

Specifications
Actual pad diameter: 5-1/2" No swirls…guaranteed!*
*See package for details
Actual pad height: 3/4" Recommended polish/wax:
Meguiar's D301 DA Microfiber Finishing Wax
Attachment material: low-profile loop
Compatible with all hook-style backing
plates
Safe to use:
Okay for use with all D/A compatible polishes and waxes
Recommended backing plate:
Meguiar's W67DA Professional 5"
DA Backing Plate
For defect removal prior to polishing:
Buff using Meguiar's DMC5 DA Microfiber Cutting Disc and D300 DA Microfiber Correction Compound
Durable and washable:
Can be washed via hand, pad cleaning
machine, or washing machine
Do not use fabric softener or bleach!
For metal polishing:
Use a dedicated pad for metal polishing- do not use for polishing paint once pad has been used for metal polishing!
Clean often!
For optimal cleaning:
Blow disc clean using compressed air

If compressed air is not available, agitate microfibers using a soft bristled nylon brush,
then place disc face onto a microfiber towel and run pad against it using a low-speed machine setting

Clean until disc looks debris-free and fluffy
Use caution when cleaning pads!
Debris can fling at high speed and lodge into eyes- wear eye protection

If cleaning discs by placing the face of the disc into a towel and running the machine, make certain that the towel does not come into contact with the machine's drive spindle

Part Number:
9.BF150XH
Use pad to:
CUT
Diameter:
5" VELCRO / 6" FACE
Pad Material:
MICROFIBER
5" Blue Microfiber Cutting Pad
Designed for use with dual-action and orbital machines, these pads are able to rapidly eliminate swirl marks, scratches, & oxidation. Low profile, slot-cut design improves contourability and minimizes mass (less heat retention, improved balance). Flared-edge delivers comfort & agility. Injection molding melds 3 pad layers together (zero possibility of glue failure!).
Price:
$12.39
Qty:

Rupes 5" Microfiber Polishing Pads

Rupes 5" Microfiber Polishing Pads

Rupes 5" Microfiber Polishing Pads
With the option of microfiber or foam, there's no reason NOT to choose a Rupes Coarse-Cut Pad! In general, the Blue Coarse Microfiber Cutting Pad is quicker at eliminating severe paint defects. If the task at hand requires the elimination of sanding mark ridges (smooth and glossy sanding marks that have been polished, but are not fully eliminated), the microfiber pad is usually the better choice. However, if the goal is the elimination of heavy oxidation (such as is commonly found on motorhomes, boats, or any other vehicle that is exposed to harsh environmental conditions), then the Blue Coarse Foam Cutting Pad is the better choice. This is because microfiber has a tendency to load with paint residue quicker the the blue foam pad, which is very porous and rigid, and therefore much more difficult to clog with debris.With the option of microfiber or foam, there's no reason NOT to choose a Rupes Polishing or Finishing Pad! While the Medium Microfiber Yellow Finishing Pad delivers an increased level of cutting power, it can at times leave a micro-hazed finish (ultra-fine polishing marks). Should this occur, re-polish any hazed areas with the Yellow Foam Polishing Pad. Either pad is versatile, and able to be successfully used for a variety of fine polishing and waxing tasks.This illustration includes VERY accurate "weight & measures" information. I weighed and measured the pads myself (and made this illustration as well!)
Click to enlarge image(s)
UFO looks, with"outta-sight!" performance.

Rupes® 5" Microfiber Polishing Pads were designed specifically for use with the wonderful line of Rupes BigFoot® Polishing Machines, but they work well with all brands of random orbital polishers.  These pads feature several unique design elements.

Spiral Slots.
The first time you see a Rupes Microfiber Polishing Pad, the innovative spiral slots are immediately apparent. It's good to know that the slots weren't cut into the pads just for looks! By removing a portion of each pad via the slots, pad mass has been decreased. This results in a lighter weight, cooler-running pad.  The spiral slots also improve the contouring ability of the pad, allowing it to be comfortably be used on curved, rounded, or complex shapes.  The design engineers at Rupes also claim an improvement in the dispersement of buffing liquids across the pad face.

Patented design = no glue!
Buffing pads are exposed to all sorts of potentially damaging pressures, temperatures, and motions. It's no surprise then that over time, its materials can weaken, tear, or altogether fail. One of the most common (and frustrating) pad failures occurs to its adhesive system (the glue that holds the various layers of a buffing pad together).

The design engineers at Rupes solved this problem by utilizing an injection molding process to combine three intermediate layers into one, effectively replacing the foam core and its surrounding adhesive layers. This process melds rather than glues the Velcro and microfiber layers together.  Another plus: the white foam-like polyurethane resin is durable and resilient, which is a sought after trait when designing any buffing pad.

Low profile, flared-edge design feels agile and comfortble.
If you're a fan of polishing pads that feature a beleved or flared edge (where the Velcro face of the pad is smaller in diameter than its polishing face), you'll appreciate how agile & comfortable these Rupes 5" Microfiber Polishing Pads feel during use.
Rupes Microfiber Polishing Pads are available in two grades and three sizes:

• 3"    (080mm Velcro / 100mm pad face)
• 5"    (130mm Velcro / 150mm pad face)
• 6"    (155mm Velcro / 180mm pad face) (not currently available through our site)

Rupes  Blue  Coarse Microfiber Cutting Pads are designed to eliminate heavy paint defects, such as swirl marks, scratches, and oxidation. This pad features a short and dense microfiber material, and is perfect for use with virtually any heavy-cut compound, including Rupes Zephir and Rupes Quarz Buffing Gels.

Rupes  Yellow  Medium Microfiber Finishing Pads are designed to eliminate ultra-fine swirl marks, haziness, and defects. This pad features a long, soft microfiber material, and is perfect for use with virtually any fine polish, including Rupes Keramik and Rupes Diamond Gloss Buffing Gels.

For ultimate paint clarity: Final-polish each section using a yellow or white Rupes Foam Buffing Pad.

To view all Rupes pads, visit the Rupes Buffing Pads Page.
To view our entire buffing pad lineup, visit the Buffing Pad Main Page.

Quantity Price
1 - 5
$12.39
6 - 11
$10.39
12+
$9.69

Part Number:
9.BF150XM
Use pad to:
POLISH
Diameter:
5" VELCRO / 5" FACE
Pad Material:
MICROFIBER
5" Yellow Microfiber Polishing Pad
Designed for use with dual-action and orbital machines, these pads quickly eliminate ultra-fine swirl marks, dullness, or haze. Low profile, slot-cut design improves contourability and minimizes mass (less heat retention, improved balance). Flared-edge delivers comfort & agility. Injection moldeding melds 3 pad layers together (zero possibility of glue failure!).
Price:
$12.39
Qty:

Rupes 5" Microfiber Polishing Pads

Rupes 5" Microfiber Polishing Pads

Rupes 5" Microfiber Polishing Pads
With the option of microfiber or foam, there's no reason NOT to choose a Rupes Coarse-Cut Pad! In general, the Blue Coarse Microfiber Cutting Pad is quicker at eliminating severe paint defects. If the task at hand requires the elimination of sanding mark ridges (smooth and glossy sanding marks that have been polished, but are not fully eliminated), the microfiber pad is usually the better choice. However, if the goal is the elimination of heavy oxidation (such as is commonly found on motorhomes, boats, or any other vehicle that is exposed to harsh environmental conditions), then the Blue Coarse Foam Cutting Pad is the better choice. This is because microfiber has a tendency to load with paint residue quicker the the blue foam pad, which is very porous and rigid, and therefore much more difficult to clog with debris.With the option of microfiber or foam, there's no reason NOT to choose a Rupes Polishing or Finishing Pad! While the Medium Microfiber Yellow Finishing Pad delivers an increased level of cutting power, it can at times leave a micro-hazed finish (ultra-fine polishing marks). Should this occur, re-polish any hazed areas with the Yellow Foam Polishing Pad. Either pad is versatile, and able to be successfully used for a variety of fine polishing and waxing tasks.This illustration includes VERY accurate "weight & measures" information. I weighed and measured the pads myself (and made this illustration as well!)
Click to enlarge image(s)
UFO looks, with"outta-sight!" performance.

Rupes® 5" Microfiber Polishing Pads were designed specifically for use with the wonderful line of Rupes BigFoot® Polishing Machines, but they work well with all brands of random orbital polishers.  These pads feature several unique design elements.

Spiral Slots.
The first time you see a Rupes Microfiber Polishing Pad, the innovative spiral slots are immediately apparent. It's good to know that the slots weren't cut into the pads just for looks! By removing a portion of each pad via the slots, pad mass has been decreased. This results in a lighter weight, cooler-running pad.  The spiral slots also improve the contouring ability of the pad, allowing it to be comfortably be used on curved, rounded, or complex shapes.  The design engineers at Rupes also claim an improvement in the dispersement of buffing liquids across the pad face.

Patented design = no glue!
Buffing pads are exposed to all sorts of potentially damaging pressures, temperatures, and motions. It's no surprise then that over time, its materials can weaken, tear, or altogether fail. One of the most common (and frustrating) pad failures occurs to its adhesive system (the glue that holds the various layers of a buffing pad together).

The design engineers at Rupes solved this problem by utilizing an injection molding process to combine three intermediate layers into one, effectively replacing the foam core and its surrounding adhesive layers. This process melds rather than glues the Velcro and microfiber layers together.  Another plus: the white foam-like polyurethane resin is durable and resilient, which is a sought after trait when designing any buffing pad.

Low profile, flared-edge design feels agile and comfortble.
If you're a fan of polishing pads that feature a beleved or flared edge (where the Velcro face of the pad is smaller in diameter than its polishing face), you'll appreciate how agile & comfortable these Rupes 5" Microfiber Polishing Pads feel during use.
Rupes Microfiber Polishing Pads are available in two grades and three sizes:

• 3"    (080mm Velcro / 100mm pad face)
• 5"    (130mm Velcro / 150mm pad face)
• 6"    (155mm Velcro / 180mm pad face) (not currently available through our site)

Rupes  Blue  Coarse Microfiber Cutting Pads are designed to eliminate heavy paint defects, such as swirl marks, scratches, and oxidation. This pad features a short and dense microfiber material, and is perfect for use with virtually any heavy-cut compound, including Rupes Zephir and Rupes Quarz Buffing Gels.

Rupes  Yellow  Medium Microfiber Finishing Pads are designed to eliminate ultra-fine swirl marks, haziness, and defects. This pad features a long, soft microfiber material, and is perfect for use with virtually any fine polish, including Rupes Keramik and Rupes Diamond Gloss Buffing Gels.

For ultimate paint clarity: Final-polish each section using a yellow or white Rupes Foam Buffing Pad.

To view all Rupes pads, visit the Rupes Buffing Pads Page.
To view our entire buffing pad lineup, visit the Buffing Pad Main Page.

Quantity Price
1 - 5
$12.39
6 - 11
$10.39
12+
$9.69