Rupes 2" Nano Velcro Backing Plate


















Rupes 2" Nano Velcro Backing Plate

Rupes 2" Nano Velcro Backing Plate

Rupes 2" Nano Velcro Backing Plate
996.001<br/>Rupes® 2" Nano Velcro Backing Plate.<br/><br/>Actual diameter: 2"<br/>Velcro diameter: 1-13/16"<br/>Plate material: Plastic<br/>Thread size: M8-1.25 male<br/>Weight: 8 grams<br/><br/>Fits Short Neck (HR81M) and Long Neck (HR81ML) Rupes Nano Multi-Function Polishers.<br/><br/>996.001<br/>Rupes® 2" Nano Velcro Backing Plate.<br/><br/>Actual diameter: 2"<br/>Velcro diameter: 1-13/16"<br/>Plate material: Plastic<br/>Thread size: M8-1.25 male<br/>Weight: 8 grams<br/><br/>Fits Short Neck (HR81M) and Long Neck (HR81ML) Rupes Nano Multi-Function Polishers.<br/><br/>996.001<br/>Rupes® 2" Nano Velcro Backing Plate.<br/><br/>Actual diameter: 2"<br/>Velcro diameter: 1-13/16"<br/>Plate material: Plastic<br/>Thread size: M8-1.25 male<br/>Weight: 8 grams<br/><br/>Fits Short Neck (HR81M) and Long Neck (HR81ML) Rupes Nano Multi-Function Polishers.<br/><br/>996.001<br/>Rupes® 2" Nano Velcro Backing Plate.<br/><br/>The 996.001 also installs onto the 562.390/C Rupes BigFoot Nano Rotary Action Module, although it is NOT RECOMMENDED. Shown paired to the 1-1/4" Velcro-Faced Backing Plate (995.001).<br/><br/>This module should ONLY be paired with the 1" Velcro Backing Plate. If an attempt is made to install the 2" Velcro Backing Plate onto this module, the backside of the plate will twist & then JAM against the Nano's protective shroud, and become STUCK. Even worse: the Nano's delicate composite internal gears may BREAK due to the strain.<br/><br/>In an attempt to install the 2" backing plate onto the rotary module, some Nano users have chosen to remove the protective shroud to eliminate the clearance issue. Although this seems to be a feasible workaround, the potential friction & drag created by a 2" pad (run in rotary mode) can overstress the Nano, potentially weakening, damaging, or breaking its gears (which is WHY the module was purposely built SHORT).<br/><br/>Actual diameter: 2"<br/>Velcro diameter: 1-13/16"<br/>Plate material: Plastic<br/>Thread size: M8-1.25 male<br/>Weight: 8 grams<br/><br/>9.1396/C<br/>Rupes BigFoot Nano Multi-Wrench.<br/><br/>Use to install and remove modules & backing plates.<br/><br/>291.390/C<br/>Rupes Rotary-Action Extension Shaft<br/><br/>Extend the reach of YOUR Nano! The Rupes® 291.390/C Nano Rotary-Action Extension Shaft is made specifically for use with the Rupes iBrid Nano Multi-Function Polisher. This extension adds 2-1/4" of length between the machine and its backing plate. It features M6-1.0 male thread on one end (which mounts into the machine), and M8-1.25 female thread on the other (Nano Backing Plates screw into this end).<br/><br/>996.001<br/>Rupes® 2" Nano Velcro Backing Plate.<br/><br/>If you plan to use a Velcro-backed sanding disc or rosette, the 996.001 also installs onto the Rupes BigFoot Nano 3mm Random Orbital Module (581.390/C). Shown paired to the 1" Vinyl-Faced Backing Plate (997.001).<br/><br/>996.001<br/>Rupes® 2" Nano Velcro Backing Plate.<br/><br/>The 996.001 also installs onto the Rupes BigFoot Nano 12mm Random Orbital Module (580.390/C). Shown paired with the 996.001 Nano 2" Velcro Backing plate.<br/><br/>
Click to enlarge image(s)


Fits all Rupes® Nano Multi-Function Polishers.
2" Diameter Nano Velcro-Face Backing Plate.

Rupes® BigFoot Nano Multi-Function Polishers can be used for a multitude of tasks, but its trio of backing plates must be in tip-top shape. After extended use, the factory supplied backing plates can degrade. An accidental dropping of the machine can bend or break a plate. You'll be dead in the water unless you've got a replacement Nano Backing Plate on hand.

The Rupes 996.001 2" Nano Velcro-Face Backing Plate fits all HR81M & HR81ML BigFoot iBrid Nano Polishers.

    Looking for a 1-1/4" version of this plate?  
Check out the 995.001 Rupes 1-1/4" Nano Velcro-Face Backing Plate.

    Looking for a 1-1/4" vinyl version of this plate (for PSA sanding rosettes)?  
Check out the 997.001 Rupes 1-1/4" Nano Vinyl-Face Backing Plate.
Specifications

  • Backing plate diameter: 2"

    • Velcro diameter: 1-13/16"

    • Attachment material:
      Velcro®- low profile hook

  • Weight: 8 grams

  • Thread size: M8-1.25 male

Note: Carefully remove polishing pads to avoid loosening the Velcro material, particularly when used for extended periods of time!