Buff Daddy Shipping Contact About Cart KBM





















Part Number:
9P01.046
 Actual Diameter:
2" / 50mm
 Thread size:
M6
 Backing Material:
HOOK
The Rupes® 9P01.046 2" (50mm) Backing Plate comes factory installed on the Rupes® TA50 2" Pneumatic Random Orbital Sander. If you own a TA50, it's a good idea to keep a spare on hand, as they are not all that easy to locate in a pinch.
Price:
$23.00
Qty:
Rupes 2" Velcro Backing Plate - fits TA50

Rupes 2" Velcro Backing Plate - fits TA50

Rupes 2" Velcro Backing Plate - fits TA50
9P01.046 | Rupes TA50 2" Velcro Backing Plate<br/><br/>Actual diameter: 2” | Net weight: 14 grams | Thread size: M6-1.0<br/><br/>Random orbital machines have been around for decades, but the TA50 is compact, lightweight, and capable of spinning its 2-inch diameter Velcro backing plate lightning fast... up to 15,000 OPM!<br/><br/>Backing plate installation & removal: Place an allen wrench or the included poker into the hole. Orbit the plate until the wrench drops into the lower-lying second hole, which will temporarily eliminate random rotation of the plate. Grasp the plate, and twist by hand to tighten or loosen.<br/><br/>9P01.046 | Rupes TA50 2" Velcro Backing Plate<br/><br/>Actual diameter: 2” | Net weight: 14 grams | Thread size: M6-1.0<br/><br/>Backing plate installation & removal: Place an allen wrench or the included poker into the hole. Orbit the plate until the wrench drops into the lower-lying second hole, which will temporarily eliminate random rotation of the plate. Grasp the plate, and twist by hand to tighten or loosen.<br/><br/>
Click to enlarge image(s)


9P01.046 | Rupes 2" Velcro Backing Plate. Fits TA50.

The Rupes TA50 2" Pneumatic Mini Random Orbital Sander/Polisher is a robust, well-built machine. Although its factory-installed backing plate can last for years, accidents do happen. Should the backing plate sustain damage due to an inadvertent dropping of the machine or some other unforseen event, you'll be dead in the water unless you've got a replacement on hand. The Rupes 9P01.046 is a factory-direct replacement for the plate installed onto the TA50.

We stock backing plates for the following machines:
LHR15ES | LHR15II | LHR15III | LHR15V | HLR15 | LHR21ES | LHR21II | LHR21III | LHR21V | HLR21 | LHR75 | LHR75E | HLR75 | LHR12E | LH19E | LH76P | LD30 | TA50 | Skorpio
Specifications
  • Actual diameter: 2"

  • Attachment material: intermediate-height hook
  • Thread size: M6 male

  • Height from face to mounting pad: 1/2"

  • Weight: 14g (.50 oz.)

Part Number:
996.001
 Actual Diameter:
2"
 Thread size:
M8-1.25
 Backing Material:
HOOK
The Rupes® 996.001" 2" Velcro Backing Plate is designed for use with the Rupes Nano Multi-Function Polisher. Composite Plastic plate and threads are lightweight and durable.
Price:
$17.00
Qty:
Rupes 2" Nano Velcro Backing Plate

Rupes 2" Nano Velcro Backing Plate

Rupes 2" Nano Velcro Backing Plate
996.001<br/>Rupes® 2" Nano Velcro Backing Plate.<br/><br/>Actual diameter: 2"<br/>Velcro diameter: 1-13/16"<br/>Plate material: Plastic<br/>Thread size: M8-1.25 male<br/>Weight: 8 grams<br/><br/>Fits Short Neck (HR81M) and Long Neck (HR81ML) Rupes Nano Multi-Function Polishers.<br/><br/>996.001<br/>Rupes® 2" Nano Velcro Backing Plate.<br/><br/>Actual diameter: 2"<br/>Velcro diameter: 1-13/16"<br/>Plate material: Plastic<br/>Thread size: M8-1.25 male<br/>Weight: 8 grams<br/><br/>Fits Short Neck (HR81M) and Long Neck (HR81ML) Rupes Nano Multi-Function Polishers.<br/><br/>996.001<br/>Rupes® 2" Nano Velcro Backing Plate.<br/><br/>Actual diameter: 2"<br/>Velcro diameter: 1-13/16"<br/>Plate material: Plastic<br/>Thread size: M8-1.25 male<br/>Weight: 8 grams<br/><br/>Fits Short Neck (HR81M) and Long Neck (HR81ML) Rupes Nano Multi-Function Polishers.<br/><br/>996.001<br/>Rupes® 2" Nano Velcro Backing Plate.<br/><br/>The 996.001 also installs onto the 562.390/C Rupes BigFoot Nano Rotary Action Module, although it is NOT RECOMMENDED. Shown paired to the 1-1/4" Velcro-Faced Backing Plate (995.001).<br/><br/>This module should ONLY be paired with the 1" Velcro Backing Plate. If an attempt is made to install the 2" Velcro Backing Plate onto this module, the backside of the plate will twist & then JAM against the Nano's protective shroud, and become STUCK. Even worse: the Nano's delicate composite internal gears may BREAK due to the strain.<br/><br/>In an attempt to install the 2" backing plate onto the rotary module, some Nano users have chosen to remove the protective shroud to eliminate the clearance issue. Although this seems to be a feasible workaround, the potential friction & drag created by a 2" pad (run in rotary mode) can overstress the Nano, potentially weakening, damaging, or breaking its gears (which is WHY the module was purposely built SHORT).<br/><br/>Actual diameter: 2"<br/>Velcro diameter: 1-13/16"<br/>Plate material: Plastic<br/>Thread size: M8-1.25 male<br/>Weight: 8 grams<br/><br/>9.1396/C<br/>Rupes BigFoot Nano Multi-Wrench.<br/><br/>Use to install and remove modules & backing plates.<br/><br/>291.390/C<br/>Rupes Rotary-Action Extension Shaft<br/><br/>Extend the reach of YOUR Nano! The Rupes® 291.390/C Nano Rotary-Action Extension Shaft is made specifically for use with the Rupes iBrid Nano Multi-Function Polisher. This extension adds 2-1/4" of length between the machine and its backing plate. It features M6-1.0 male thread on one end (which mounts into the machine), and M8-1.25 female thread on the other (Nano Backing Plates screw into this end).<br/><br/>996.001<br/>Rupes® 2" Nano Velcro Backing Plate.<br/><br/>If you plan to use a Velcro-backed sanding disc or rosette, the 996.001 also installs onto the Rupes BigFoot Nano 3mm Random Orbital Module (581.390/C). Shown paired to the 1" Vinyl-Faced Backing Plate (997.001).<br/><br/>996.001<br/>Rupes® 2" Nano Velcro Backing Plate.<br/><br/>The 996.001 also installs onto the Rupes BigFoot Nano 12mm Random Orbital Module (580.390/C). Shown paired with the 996.001 Nano 2" Velcro Backing plate.<br/><br/>
Click to enlarge image(s)


996.001 | 2" Diameter Velcro-Face Backing Plate.

Rupes BigFoot iBrid Nano Multi-Function Polishers can be used for a multitude of tasks, but its trio of backing plates must be in tip-top shape. After extended use, the factory supplied backing plates can degrade. An accidental dropping of the machine can bend or break a plate. You'll be dead in the water unless you've got a replacement Nano Backing Plate on hand.

This 2" Velcro-Face Backing Plate fits all HR81M & HR81ML BigFoot iBrid Nano Polishers.


View the full inventory of iBrid Nano parts here.

View the Rupes iBrid Nano main page here.

 View all Rupes products here.
Parts for other Rupes machines.
LHR15ES | LHR15ll | LHR15lll | LHR21ES | LHR21ll | LHR21lll
LHR12e | LHR75e | LHR75 | LH19E | iBrid Nano

View the full inventory of iBrid Nano parts here.

View the Rupes iBrid Nano main page here.

 View all Rupes products here.
Parts for other Rupes machines.
LHR15ES | LHR15ll | LHR15lll | LHR21ES | LHR21ll | LHR21lll
LHR12e | LHR75e | LHR75 | LH19E | iBrid Nano
Specifications

  • Backing plate diameter: 2"

    • Velcro diameter: 1-13/16"

    • Attachment material:
      Velcro®- low profile hook

  • Weight: 8 grams

    • Thread size: M8-1.25 male

Note: Carefully remove polishing pads to avoid loosening the Velcro material, particularly when used for extended periods of time!